Steel 6.0

Perfect for use in large open-plan areas, the Steel 6.0 cheap office furniture range is equally well-suited to traditional offices where space is at a premium. Chose from stand alone models or the shared leg system with aluminium frames and a choice of 5 top finishes to create the perfect environment.

25 mm thick melamine-faced particle board, density 630 to 710 kg/m3;

5 choices of melamine finish;

Fire safety classification: the particle board used is classified as M3 (combustible, moderately flammable);

Our particle board is also certified to E1 (control of fomaldehyde emissions) and officially recognized by the PEFC (Programme for the Endorsement of Forest Certification) as being produced using timber sourced from sustainably managed forest;

Edges protected by a 2 mm thick strip of impact-resistant PVC, multi-ply in the case of copper pear (MD) tops only, plain in all other cases;

Maintenance advice: use soapy water and avoid products which contain solvents.

Arched leg design;

Tubular metal legs of 50 x 50 mm square section made from sheet steel 15/10 mm in thickness;

Legs are attached to the desktop via two struts, height 15 mm, using metal inserts;

Legs are welded for maximum strength and fitted with stabilizer feet, adjustable through 20 mm, for use on uneven floors;

Standard legs, fixed height 72 cm, or height-adjustable legs, adjustable from 62 to 86 cm at 20 mm intervals;

Legs coated with epoxy powder in an aluminium grey (SB) textured finish;

Reversible, telescopic central metal beam (depth: 50 mm, height: 80 mm), open-sided along its entire length and attached to the legs using screws;

The beam ensures that the desktop remains firm at all times and prevents any danger of sagging.

Built-in horizontal cable management via the cable trough within the beam;

Optional vertical cable management (see main catalogue, p. 124-125);

Optional desktop cable ports (see main catalogue, p. 124-125).