V + A

MMaking optimum use of cable management techniques, the V + A range combines elegance with advanced technology. Choice is provided in the form of “I” or “L” shaped legs as well as a varied choice of 5 stocked top options and 2 stocked frame finishes.

25 mm thick particle board, density 650 kg/m3;

Wood “ecologically certified” by the PEFC and FSC, in recognition that all or a proportion of the timber used is sourced from sustainably managed forest. Our tops are made from material certified to FSC-STD-40-004 (vers.01);

Particle board certified to E1 (control of fomaldehyde emissions) with an emission level of 6.5 mg HCNO/100 mg and compliant with standards EN 120/92 and NF EN 717-2;

Board is covered with a sheet of decorative monochrome or wood effect paper. During the High Resistance Melamine process, this paper is impregnated with a duroplastic resin to provide maximum protection, an industrial process which ensures that the furniture achieves outstanding results in terms of resistance to scratching and abrasion, thereby meeting the EN438 standard. An additional sheet of paper applied to the underside of tops to provide balance is also impregnated with duroplastic resin;

Edges protected by a 2 mm thick strip of ABS (Acrylonitrile Butadiene Styrene), which is glued to the board and rounded at the top and bottom for maximum user comfort;

Desktop fire safety classification: in accordance with the FD - P92-057 standard, particle board greater or equal to 18 mm in thickness is classified as M3 (combustible, moderately flammable);

Maintenance advice: use soapy water and avoid products which contain solvents.

2 choices of leg design:

• "I" shaped base;
• "L" shaped base;

Bases are moulded from cast aluminium and attached by screws to folded sheet steel uprights, thickness 20/10, complete with removable clip-on panels, width 19 mm, of curved design. Pressed sheet steel top plates, thickness 20/10, are attached by screws to the uprights;

Structure :

• 20 mm thick melamine-faced modesty panel, H 250 mm. Total height beneath desktop: 290 mm;
• telescopic, open-sided beam made from folded 15/10 steel, height: 70 mm;

Standard legs, fixed height 72 cm, or height-adjustable legs, adjustable from 62 to 86 cm, with integral height gauge;

Cable management:

• vertical: within the legs behind the removable panel. Cable port, ø 54 mm, at the bottom end;
• horizontal: via the telescopic, open-sided beam.